BEARCAT TURF & OUTDOORS
Soake pre-cast concrete plunge pool set into a finished backyard patio, the model Bearcat installs in Mistletoe Heights, Fort Worth, TX
← Mistletoe Heights, Fort Worth

Tarrant County

Pre-Cast Concrete Plunge Pools & Modern Backyards in Mistletoe Heights, Fort Worth, TX

A pre-cast concrete plunge pool from Bearcat Turf & Outdoors: built off-site, set by crane in a single day, and matched to a turf surround that never fights local clay. We are a Soake Pools Preferred Partner, based in Aledo and serving Mistletoe Heights.

The Tarrant County soil factor.

Tarrant County clay is less uniformly aggressive than Parker County's black gumbo, but it's still expansive enough to move a poorly based structure over time, and decades of urban fill, utility trenches, and grading adjustments in many neighborhoods add another layer of unpredictability. A pre-cast pool shell sidesteps both problems: it arrives finished from the factory and sits on an engineered, compacted base built specifically for the soil underneath it, rather than taking on whatever the native ground and its buried history are doing that year.

Mistletoe Heights' irregular, pre-modern-engineering lot grades mean we're often correcting drainage flow at the same time we're planning the crane pick.

Crane access and HOA approval in Mistletoe Heights.

These established, close-in lots mean crane reach, alley access, and overhead clearance need a closer look than they would in a newer subdivision, which is exactly what our free Google Earth review and on-site walkthrough are built to catch before anyone commits to anything. Older neighborhoods like this also tend to carry decades of buried utility lines and past grading work, so we verify what's underground before finalizing the excavation plan.

The set itself is a rigging job we plan around one number: a finished pool weighs about 23,000 pounds. Depending on access, it arrives by boom truck, crane (over a single-story roofline is routine work), or a telehandler rig for narrow side yards, picked on a spreader bar from four cast-in lifting rings.

Above-grade Soake pre-cast plunge pool set into a stone patio, an install format that fits tighter Mistletoe Heights lots
A compact plunge-pool footprint fits Mistletoe Heights lots, and HOAs, that a full gunite pool never would.

Why we pair every pool with a turf surround.

Bearcat builds turf and pre-cast pools under one roof, and in Mistletoe Heights those two things belong together. Local clay does the same thing to a pool-deck lawn that it does to the rest of the yard: it cracks, puddles, and dies off in a ring around the coping where chlorine splash-out and constant foot traffic beat up real Bermuda every summer.

Turf set flush to the pool edge solves all of it at once. No mud tracked in from a bare-dirt surround after a rain. No chlorine-scorched grass ring that never fills back in. No standing water at the coping line, because the base underneath is laser-graded to the same 1-2% drainage slope we build into every turf install. The result is a pool deck that looks the same in August as it did in April, with none of the maintenance a natural lawn surround demands.

Aerial view of a Bearcat-built backyard with a pool, paver patio, putting green, and turf surround
A backyard we built: pool, paver patio, putting green, and turf surround as one connected space.

Built to last, in writing.

  • Built by the original. Soake has hand-tiled precast plunge pools since 2014, with more than 1,800 installed nationwide, and every shell is ETL listed with the sticker on the pool for your city inspector.
  • 5-year structural warranty on the Soake shell, 3-year Jandy equipment warranty, and a 25-year Laticrete warranty on the tile bond, the exact failure mode that forces resurfacing on plaster pools.
  • 15-year turf warranty, 5-year Bearcat workmanship warranty on every surround, base, and drainage line we install alongside the pool.
  • Aledo-based, DFW-wide. We are headquartered in Aledo and travel to Mistletoe Heights for walkthroughs, installs, and warranty visits.

Next step

Book a free yard walk and crane clearance check with Colin.

Colin walks your Mistletoe Heights yard in person, confirms crane access and utility clearances, and talks through pool models and turf surround options on the spot. You leave with a fixed-price proposal, not a number that grows later.

Free Google Earth review · Free on-site walkthrough · Fixed-price proposal · No deposit to book the assessment

Budget check

What would artificial turf cost for your Mistletoe Heights pre-cast pool project?

Three quick questions. Real price range for your project in under a minute. No email required to see the number.

Run the Calculator →

Frequently asked questions

Does a pre-cast plunge pool handle Mistletoe Heights soil better than a gunite pool?

Yes. Gunite is sprayed against your native soil and takes any shrink-swell movement directly, which is the root cause of the structural cracking common in older gunite pools across Tarrant County. A pre-cast shell is cured off-site and set on an engineered, compacted base that isolates it from the ground, so the base absorbs seasonal movement instead of the pool shell.

Can a crane reach pool sites in Mistletoe Heights?

In the large majority of yards, yes. We start every Mistletoe Heights project with a free Google Earth review of the lot: gate width, roofline, overhead lines, and where the crane can park. These established, close-in lots mean crane reach, alley access, and overhead clearance need a closer look than they would in a newer subdivision, which is exactly what our free Google Earth review and on-site walkthrough are built to catch before anyone commits to anything. Older neighborhoods like this also tend to carry decades of buried utility lines and past grading work, so we verify what's underground before finalizing the excavation plan.

Will my Mistletoe Heights HOA approve a pre-cast plunge pool faster than a full gunite pool?

Generally, yes. A 7'x13' or smaller plunge pool has a fraction of the impervious-coverage footprint of a traditional gunite pool, which usually keeps the project inside standard architectural review instead of triggering a variance. We also hand the review committee a finished factory spec sheet instead of a set of custom construction drawings, which is normally the faster packet to approve.

How does turf around the pool help in Mistletoe Heights?

A pool-deck lawn takes the same abuse as the rest of the yard: cracking, puddling, and Bermuda struggling against chlorine splash-out at the coping line. Turf set flush to the pool edge solves both at once. No mud tracked in from the surround, no dead grass ring around the pool, and a laser-graded, well-drained base that does not shift the way native soil does.

How do I book a yard walk and crane assessment in Mistletoe Heights?

Call or text 817-803-1445, or request one online. Colin walks the site, confirms crane access and utility lines, and talks through pool models and turf surround options on the spot. You leave with a fixed-price proposal, not a number that grows later.

Trusted by neighbors

What Mistletoe Heights neighbors say.

5.0 · 26 Google reviews
The mud was destroying the yard every time the dogs came in. Six months later the grass looks better than day one, and the kids can play out there the morning after a storm.
Sarah · Aledo
I watched their crew compact the crushed stone in two passes. That's not normal in this industry — most installers cut the base prep. A year in, the surface is dead-flat.
Mike · Walsh Ranch
We got three quotes. Bearcat was the only one who walked the yard, asked about drainage, and gave us a fixed price. Six months in, I still don't know where the water goes — but it's never sitting on the yard.
Jennifer · Willow Park
Free Quote